86-531-67808851
No. 15612 Century Avenue, Room 1612, Building 1, High Tech Zone, Jinan, Shandong, China
ZF4033 Spectrum Analyzer
(Scientific Instrument Electronics Meter Didactic Aids Teaching Material for Teaching Purpose)
4033 is the portable spectrometer of small volume, light weight, higher cost performance. It has the keyboard layout for easy operation. High definition 8.5 inch TFT color LCD. Display interface including proper setting up and prompt message. Standard configuration or extensible USB,LAN and R232 communication interface, it can display and control remote network visit by the virtual terminal. This spectrometer extensive apply to science of education, enterprise research and development and industrial manufacture and other territory, it can carry out failure checking and the analysis and comparison of signal frequency for the RF wired and wireless system. Its extensive applies to the communication industry.
Characteristic and advantage
All-digital intermediate frequency processing technology
Frequency range: 9 KHz-3GHz
Display average noise level (DANL):-140dBm (typical value)
Phase noise:-90dBc/Hz (excursion10KHz)
Whole range accuracy: less than 1.0dB (typical value)
Min. resolution ratio bandwidth (RBW) 100 Hz
Standard configuration preposition amplifier
Track signal source generator (optional)
AM or FM demodulation measurement (optional)
It has abundant measurement function and multiple automatic set-up function.
Technical index
Model | 4033 | |
Frequency range | 9KHz~3GHz | |
Aging rate | ±0.1ppm year | |
Cursor frequency reading accuracy (start, stop, centre, cursor) | Cursor resolution ratio: (frequency scan width) sweep points-1) | |
Uncertainty: ± (frequency indication× frequency reference uncertainty+1%×scan width+10%×resolution ratio bandwidth+cursor resolution ratio+1Hz) | ||
Cursor frequency counter | Max. Resolution ratio :1Hz | |
Frequency scan range | Zero span,100Hz~max. Frequency value, resolution ratio:1Hz | |
SSB phase | Less than -90dBc per Hz@10KHz | |
Resolution bandwidth (RBW) -3dBbandwidth | 100 Hz ~ 1 MHz | |
Resolution filter form factor : less than 5 : 1 | ||
Measurement range | +30dBm to display average noise level (DANL) | |
Max. Safety input level | +30dBm (1 W) ,DC:±50D b. | |
Display average noise level (DANL) pre-amplifier start | ≤-128dBm, -140dBm (typical value) | |
Level measurement | Unit: dBm, dBmV, dBμV, dBμV/m, μV, mV, V, mW, W | |
Detector: positive peak, negative peak, sampling detection, normalcy detection | ||
Level measurement error:± (0.6dB+frequency response) .frequency response:±1dB ±1dB (typical value) | ||
Reference level | Setting range: -100dBm ~ +30dBm | |
Stray response | Second harmonic distortionless than -70 dB c. | |
Third order crosstalk less than -70dBc d. | ||
Inherent remnant response less than -88dBm (typical value) e. | ||
Scan time | Range:10 ms ~ 3000 s (SPAN more than 100Hz) | |
Scan mode: continuous, once | ||
Trigger source: free-running operation, video detect ,external triggering | ||
RF input | Connector and impedance: N-Female:50Ω (nominal value) ,VSWR less than 1.5:1 (attenuator setting10dB) | |
External interface | USB,LAN,RS232 or VGA (alternative) | |
Automatic testing function | Phase noise, adjacent-channel power, occupied bandwidth, third order intermodulation, Pass/Fail, standing-wave ratio, etc. | |
Display | WLCD and type:8.5inchTFT LCD, language: English, Chinese | |
Power requirement | Supply voltage: 100V ~ 240V ,frequency rated value: 50/60/400Hz,power dissipation: less than 35W | |
Environment and size | Weight: less than7 kg, size:410mm×210mm×136mm | |
Track signal generator (optional)
| Frequency range:5MHz~3GHz (available 9KHz) | |
Output level: 0~-25dBm | ||
Output flatness:±3dB (≥5MHz) | ||
Connector and impedance: N-Female 50Ω (nominal value) | ||
AM/FM demodulation measurement( optional) | AM demodulation | Modulation frequency:20Hz~100KHz |
Modulation depth:5%~95% | ||
Measurement accuracy:±4% | ||
FM demodulation | Modulation frequency:20Hz~200KHz | |
Frequency offset range:20Hz~400KHz | ||
frequency offset accuracy:4% | ||
SINAD | Measurement range:0~60dB | |
Measurement accuracy:±1dB | ||
Remark: test condition:a.fc=500MHz,RBW=100Hz,VBW=1Hz b.input attenuator setting≥20 dB,pre-amplifier stop c.mixer level-40dBm, frequency: 1MHz ~ 1500MHz d.double frequency signal frequency interval more than 1MHz, mixer level-30dBm e. input end connect50Ω load,ATT:0dB | ||
Product Details and Warranty
We supply suitable spare pats according to experiment requirement, our products take aluminum structure, A4 paper dimension aluminum and plastic hanging box structure.
We supply 3 years warranty time. Please see photo for foreign sales department and photo for spare parts.
Packaging & Delivery
Package details: plastic film+ plastic foam + plywood box with pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.
Arrange delivery within 45 days upon receipt of payment.
Please see below photo for detailed package.
Company Information
We supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today's and tomorrow's careers.
Photo for Clients Visiting Factory
Photo for Workshop and Equipments
Service
We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
